9GF bench cable (COMING LATER!)

This activation enables support for the Magneti-Marelli 9GF bench cable, including all its supported wiring variants (if multiple exist).
To use this activation, you'll need an Express Box along with the C4 Cable (56-56pin connectors) which together provide the physical connection to the ECU.

Each of our cables (C1, C2, ... Cx) can connect to multiple ECUs in both boot and bench mode, depending on the activations.
Thanks to this innovation, full ECU coverage is achieved with just a few physical cables, supporting over 350+ types of control units and their 440+ wiring variants.
This allows you to expand your bench cable coverage with an investment of only 8–39 EUR per ECU, compared to the 80–250 EUR cost of traditional bench cables.

This 9GF ECU is implemented across the following vehicle brands. With the Express Cable, you're fully covered: Alfa Romeo, Fiat, Ford, Lancia

You can buy the (physical) cables with full activation included - this is the most cost-effective option.
If you'd rather start small and expand later, you have two options: activate ECUs one by one (like this 9GF), or save more by purchasing a bundle of, say, 10 bench cable activations in advance - and decide later which ECUs you want to activate.

Check out our
• Basic and Pro packages
• Cx Cables
• Activation Bundles
in the webshop.

Note: The physical cable, Express Box, and other items shown are not included - they are for demonstration purposes only. This is a software activation for use with an existing Express Cable set.

See how quick and effortless

• bench mode tuning is without ECU removal
• how easy to setup the cable
• instant ECU connection on bench

9GF Bench Cable

For handling the Magneti-Marelli 9GF bench cable, this connection method offers safe and efficient ECU interfacing in your workshop.

Why choose the Magneti-Marelli 9GF bench cable?

Our modular cable setup means fewer wires on your desk and greater flexibility. One harness can handle a range of ECUs across brands.

Whether you're performing a full ECU reprogramming, adapting immobilizers, or diagnosing bench-level issues, the Magneti-Marelli 9GF bench cable gives you reliable access to critical pins without opening the unit.

The design of this solution prioritizes both compatibility and workshop efficiency. Unlike traditional cables that are limited to one function or ECU model, this bench cable operates within a flexible modular ecosystem — perfect for dynamic environments and frequently changing project needs.

Why invest in 30+ cables when 3–4 will do? This system brings your per-ECU cost down to a fraction of legacy methods.

Each Express cable is crafted with industrial-grade materials, ensuring long-term durability and consistent electrical contact over hundreds of uses.

Who is this cable for?

This product is an excellent fit for tuning professionals, ECU programmers, remapping engineers, and anyone needing consistent and safe bench access to the 9GF. Whether you're working with stock vehicles, damaged ECUs, or highly modified setups, the Magneti-Marelli 9GF bench cable enables access without opening or soldering.

Garage workshops, mobile technicians, and electronic service centers will benefit from the speed and convenience this cable offers. It’s a go-to tool for those who value both precision and reliability during bench-mode operations.

Vehicle Compatibility

Vehicle platforms using the 9GF are well-supported. You can expect compatibility with these brands:

• Alfa Romeo
• Fiat
• Ford
• Lancia

Activation Options

Go step-by-step or bulk-activate with bundle discounts — both paths are open for this ECU.

Both options are supported through our webshop, and bundle discounts are available for frequent users. If you are just starting, you can grow your activation set gradually.

Compatible Tuning Tools

The Magneti-Marelli 9GF bench cable supports numerous tuning platforms using adapter-based connections. Below is the list of compatible tools our users frequently rely on:

• Bitbox
• CMD
• Hexprog2
• KTAG
• Flex
• Kess3
• Galetto
• AMT-BST
• MMCFlash
• Scanmatik (SM2, SM2-Pro, SM3)
• bFlash
• Autotuner
• DFOX
• PCMFlash
• Trasdata

Each of these platforms has been tested for compatibility and stability with our system. Just plug in the appropriate adapter, and you're ready for ECU communication.

Bench cables you may also need

Each of these cables is available for under 8 EUR when included in a bulk activation via our Pro Package. It's the most cost-effective way to expand your ECU coverage.

EDC17C10 bench cable
EDC17CP42 bench cable
MED17.2BMW bench cable
MED17.4.2 bench cable
MEV17.2.2 bench cable
MEV17.2 bench cable
MEV17.4.2 bench cable
MEV17.4 bench cable
MEVD17.2.2 bench cable
MEVD17.2.7 bench cable