MJ8DF bench cable

This activation enables support for the Magneti-Marelli MJ8DF bench cable, including all its supported wiring variants (if multiple exist).
To use this activation, you'll need an Express Box along with the C1 Cable (94-60pin connectors) which together provide the physical connection to the ECU.

Each of our cables (C1, C2, ... Cx) can connect to multiple ECUs in both boot and bench mode, depending on the activations.
Thanks to this innovation, full ECU coverage is achieved with just a few physical cables, supporting over 350+ types of control units and their 440+ wiring variants.
This allows you to expand your bench cable coverage with an investment of only 8–39 EUR per ECU, compared to the 80–250 EUR cost of traditional bench cables.

This MJ8DF ECU is implemented across the following vehicle brands. With the Express Cable, you're fully covered: Alfa Romeo, Citroen, Fiat, Ford, Lancia, Peugeot

You can buy the (physical) cables with full activation included - this is the most cost-effective option.
If you'd rather start small and expand later, you have two options: activate ECUs one by one (like this MJ8DF), or save more by purchasing a bundle of, say, 10 bench cable activations in advance - and decide later which ECUs you want to activate.

Check out our
• Basic and Pro packages
• Cx Cables
• Activation Bundles
in the webshop.

Note: The physical cable, Express Box, and other items shown are not included - they are for demonstration purposes only. This is a software activation for use with an existing Express Cable set.

See how quick and effortless

• bench mode tuning is without ECU removal
• how easy to setup the cable
• instant ECU connection on bench

MJ8DF Bench Cable

For handling the Magneti-Marelli MJ8DF bench cable, this connection method offers safe and efficient ECU interfacing in your workshop.

Why choose the Magneti-Marelli MJ8DF bench cable?

Our modular cable setup means fewer wires on your desk and greater flexibility. One harness can handle a range of ECUs across brands.

The Magneti-Marelli MJ8DF bench cable is especially useful for precise ECU tasks like chip tuning, recovery from failed OBD writes, or bypassing anti-tuning countermeasures.

The design of this solution prioritizes both compatibility and workshop efficiency. Unlike traditional cables that are limited to one function or ECU model, this bench cable operates within a flexible modular ecosystem — perfect for dynamic environments and frequently changing project needs.

Why invest in 30+ cables when 3–4 will do? This system brings your per-ECU cost down to a fraction of legacy methods.

This solution is built not only for compatibility, but also for high reliability. You can count on it even in high-volume tuning environments.

Who is this cable for?

This product is an excellent fit for tuning professionals, ECU programmers, remapping engineers, and anyone needing consistent and safe bench access to the MJ8DF. Whether you're working with stock vehicles, damaged ECUs, or highly modified setups, the Magneti-Marelli MJ8DF bench cable enables access without opening or soldering.

Garage workshops, mobile technicians, and electronic service centers will benefit from the speed and convenience this cable offers. It’s a go-to tool for those who value both precision and reliability during bench-mode operations.

Vehicle Compatibility

This solution covers the MJ8DF, commonly found in the following vehicle manufacturers:

• Alfa Romeo
• Citroen
• Fiat
• Ford
• Lancia
• Peugeot

Activation Options

Go step-by-step or bulk-activate with bundle discounts — both paths are open for this ECU.

Both options are supported through our webshop, and bundle discounts are available for frequent users. If you are just starting, you can grow your activation set gradually.

Compatible Tuning Tools

The Magneti-Marelli MJ8DF bench cable supports numerous tuning platforms using adapter-based connections. Below is the list of compatible tools our users frequently rely on:

• Scanmatik (SM2, SM2-Pro, SM3)
• AMT-BST
• Hexprog2
• PCMFlash
• Kess3
• KTAG
• Trasdata
• Bitbox
• DFOX
• Autotuner
• Galetto
• MMCFlash
• Flex
• bFlash
• CMD

Each of these platforms has been tested for compatibility and stability with our system. Just plug in the appropriate adapter, and you're ready for ECU communication.

Bench cables you may also need

Each of these cables is available for under 8 EUR when included in a bulk activation via our Pro Package. It's the most cost-effective way to expand your ECU coverage.

MJ8F3 bench cable
MJD6F3 bench cable
MJD6JF bench cable
MJD8F3 bench cable
MEVD17.2.3 bench cable
MEVD17.8.4 bench cable
EDC17C60 bench cable
MD1CS003 bench cable
MED17.4.4 bench cable
MG1CS032 bench cable