Correct.

Absolutely.

Sure.

This is a completely new approach to ECU bench (and boot) connections for chiptuning, repair, and cloning. Our exclusive and unique solution utilizes a special multiplexer box and cables with original ECU connectors (94+60 pins, 96+58 pins, 105+91 pins, 56-56 pins and more), eliminating the need for manually connecting individual colored wires pin by pin  in bench/boot mode. – or buy countless individual bench-cables for the same coverage

The multiplexing technology allows the box to intelligently redirect power and signals to the appropriate ECU pins based on the selected configuration.

Yes. There are approximately 400 different wiring variations for the 320 ECUs, and it is expandable.

Yes, boot mode is supported. In boot mode, Express provides the power and communication lines, and also forwards the boot, reset, and CNF signals through its 3.5mm jack output. You’ll need to manually connect them after opening the ECU.

Yes, with our OBD to Express adapter, you can connect any scanner or tuning tool to Express, enabling support for ECUs on the desk. This is a great feature for ECU reset, coding, adaptation, and even flashing via an OBD protocol, as long as your tool and the selected ECU support it.

We can add new ECUs via software updates at any time, as long as they have connectors compatible with our cables and meet other necessary conditions. We can also develop additional cables and configure the Express Box accordingly. Updates provide fixes and new features seamlessly.

Of course! Buy one, test it for a month, and if for any reason you’re not satisfied, simply return it, and we’ll refund your purchase price.

We haven’t managed to do it – not even when we tried hard during testing. Of course, there’s a minimal chance if you select the wrong ECU or if the unit is already faulty.

Express checks everything before powering up:
✔ Is the correct cable connected for the selected ECU?
✔ Is the power supply safe?
✔ Does the ECU’s power consumption and profile match expectations?

It only connects if all tests pass, minimizing the risk of errors – unlike pin-by-pin wiring or traditional bench cables, which offer no protection at all.

No. It’s a one-time investment, just like a traditional cable.

Yes! Express Cable is compatible with all tuning tools. We offer affordable adapters for the 15 most popular tools. Thanks to its unified connection platform, you can connect and switch between tools in seconds.

No. We have developed 10 types of adapters, covering the 15 most popular tuning tools. The cheapest option is our universal adapter, priced at around 20 EUR, while the most advanced microcontroller-based adapter for Flex costs around 200 EUR.

You can connect any tuning tool using the universal adapter, but using specific adapters for different tools is the most convenient and professional solution.

Don’t forget to add the necessary adapters to your order!

You decide. With minimal investment, you’ll pay around 13 EUR per “cable” (activation) – see details below. For professionals, our full package brings the cost below 8 EUR per activation. Yes, instead of paying 80-350 EUR per traditional bench cable, with Express, you only pay 8-13 EUR per activation so, you get the same coverage, plus this cable also provides active protection.