Lincoln MEDG17.0 bench cable
Lincoln MEDG17.0 Bench Cable for tuning, repair, cloning
This Lincoln Bosch MEDG17.0 bench cable activation allows you to connect MEDG17.0 ECU to your tuning tool(s). For the fastest, most reliable, and most convenient bench mode programming – whether tuning, cloning, or ECU repair – get this MEDG17.0 module activation for your Express Universal Bench Cable.
Compatible tuning tools
Our Lincoln MEDG17.0 bench cable is compatible with the following tuning tools:
AMT-BST, Autotuner, bFlash, Bitbox, CMD, DFOX, Flex, Galetto, Hexprog2, Kess3, KTAG, MMCFlash, PCMFlash, Scanmatik (SM2, SM2-Pro, SM3), Trasdata. – by using the appropriate tool-specificadapter.
This cable supports Lincoln MEDG17.0 Boot Mode
Our cable also supports boot mode programming of MEDG17.0 ECUs. In boot mode, it provides stable power and CAN/K-line communication. As usual, you’ll need to open the ECU and manually connect the boot-specific lines (BOOT, RESET, CNF).
What you need to connect the MEDG17.0 ECU in Service Mode?
This is not a physical product, but a software activation. To purchase it, you must already own an Express set along with a C6 (103-95 pin) Cable , which provides the physical connection to the MEDG17.0 ECU in service mode (better known as bench mode).
The production status of the C6 Cable is: Coming later contact us!.
This is the best-priced Lincoln MEDG17.0 bench cable you’ll need for chiptuning, cloning, ECU repair
With the Express Box and just a few of its Cx Cables (like C1, C2, … Cx), your setup can handle over 350 ECUs in both boot and bench modes. To use it, the corresponding ECU like this Lincoln MEDG17.0 bench cable must first be activated. Get your activation credits and unlock your MEDG17.0 bench cable here!
Bench cables are expensive. Your time? Even more so.
You can choose a fully activated set or start with a very affordable starter set, then activate only the ECUs (bench cables) you need later on. You’ll save a significant amount of time during tuning and cloning by eliminating traditional pin-by-pin wiring. Plus, you’ll save on bench cables too – Express ECU-specific cable activations cost only 8–39 EUR, compared to traditional cables priced between 80 and 250 EUR. Check out more details about this MEDG17.0 cable.
Top Performance at the Best Price
Instead of paying the usual €80–250 for a traditional bench cable, with Express you can expand your cable set for just €8–39 per ECU anytime.
Once activated, it unlocks support for Bosch MEDG17.0 and its wiring variants (if multiple types exist), regardless of the vehicle brand. This MEDG17.0 is commonly found in vehicles from the following manufacturers: Lincoln, .
Discover the Simplicity and Speed of Tuning with Express Bench Cable
- Instant connection without ECU removal
- Just a few clicks in the intuitive menu, and your cable is configured for the selected Lincoln ECU.
- Instant ECU connection on bench with your Express set
Bench Cables for Lincoln
The Express bench cable set is also compatible with the following MEDC17 ECUs:
MEDC17 Integration in a Range of Vehicles
Our Express Bench Cable is compatible with the following vehicle brands equipped with MEDC17 control units. It offers a plug & play, failsafe connection, allowing you – in many cases – to work directly on the vehicle without removing the ECU during the bench-mode operations