{{mpg_typebrand1}} {{mpg_typeecuversion}} bench cable
{{mpg_typebrand1}} {{mpg_typeecuversion}} Bench Cable for tuning, repair, cloning
This {{mpg_typebrand1}} {{mpg_typeecubrand}} {{mpg_typeecuversion}} bench cable activation allows you to connect {{mpg_typeecuversion}} ECU to your tuning tool(s). For the fastest, most reliable, and most convenient bench mode programming – whether tuning, cloning, or ECU repair – get this {{mpg_typeecuversion}} module activation for your Express Universal Bench Cable.
Compatible tuning tools
Our {{mpg_typebrand1}} {{mpg_typeecuversion}} bench cable is compatible with the following tuning tools:
AMT-BST, Autotuner, bFlash, Bitbox, CMD, DFOX, Flex, Galetto, Hexprog2, Kess3, KTAG, MMCFlash, PCMFlash, Scanmatik (SM2, SM2-Pro, SM3), Trasdata. – by using the appropriate tool-specificadapter.
This cable supports {{mpg_typebrand1}} {{mpg_typeecuversion}} Boot Mode
Our cable also supports boot mode programming of {{mpg_typeecuversion}} ECUs. In boot mode, it provides stable power and CAN/K-line communication. As usual, you’ll need to open the ECU and manually connect the boot-specific lines (BOOT, RESET, CNF).
What you need to connect the {{mpg_typeecuversion}} ECU in Service Mode?
This is not a physical product, but a software activation. To purchase it, you must already own an Express set along with a {{mpg_typeexpresscabletag}} {{mpg_cable-pins}} Cable {{mpg_cable-info-append}}, which provides the physical connection to the {{mpg_typeecuversion}} ECU in service mode (better known as bench mode).
The production status of the {{mpg_typeexpresscabletag}} Cable is: {{mpg_typecxstatus}}.
This is the best-priced {{mpg_typebrand1}} {{mpg_typeecuversion}} bench cable you’ll need for chiptuning, cloning, ECU repair
With the Express Box and just a few of its Cx Cables (like C1, C2, … Cx), your setup can handle over 350 ECUs in both boot and bench modes. To use it, the corresponding ECU like this {{mpg_typebrand1}} {{mpg_typeecuversion}} bench cable must first be activated. Get your activation credits and unlock your {{mpg_typeecuversion}} bench cable here!
Bench cables are expensive. Your time? Even more so.
You can choose a fully activated set or start with a very affordable starter set, then activate only the ECUs (bench cables) you need later on. You’ll save a significant amount of time during tuning and cloning by eliminating traditional pin-by-pin wiring. Plus, you’ll save on bench cables too – Express ECU-specific cable activations cost only 8–39 EUR, compared to traditional cables priced between 80 and 250 EUR. Check out more details about this {{mpg_typeecuversion}} cable.
Top Performance at the Best Price
Instead of paying the usual €80–250 for a traditional bench cable, with Express you can expand your cable set for just €8–39 per ECU anytime.
Once activated, it unlocks support for {{mpg_typeecubrand}} {{mpg_typeecuversion}} and its wiring variants (if multiple types exist), regardless of the vehicle brand. This {{mpg_typeecuversion}} is commonly found in vehicles from the following manufacturers: {{mpg_typebrand1}}, {{mpg_typemorebrands}}.
Watch our {{mpg_typebrand1}} {{mpg_typeecubrand}} {{mpg_typeecuversion}} bench cable in action in this quick video!
Discover the Simplicity and Speed of Tuning with Express Bench Cable
- Instant connection without ECU removal
- Just a few clicks in the intuitive menu, and your cable is configured for the selected {{mpg_typebrand1}} ECU.
- Instant ECU connection on bench with your Express set
Bench Cables for {{mpg_typebrand1}}
The Express bench cable set is also compatible with the following {{mpg_typeecufamily}} ECUs:
{{mpg_typeecufamily}} Integration in a Range of Vehicles
Our Express Bench Cable is compatible with the following vehicle brands equipped with {{mpg_typeecufamily}} control units. It offers a plug & play, failsafe connection, allowing you – in many cases – to work directly on the vehicle without removing the ECU during the bench-mode operations